Laserjet Printer Problem Damaged Paper When Printing
Laserjet Printer Problem Damaged Paper When Printing - Have you experienced problems while printing, in this article I'll share a few solutions on the paper is damaged during printing. In this case I have encountered in HP Laserjet 1010 printer. This printer is most likely damaged by dust stuck on the fuser, so Fuser Film Sleeve damaged. Initially I did not suspect the problem fuser section for each paper that goes all broken, after my last turns unloading parts Fuser Film Sleeve truncated.
Once I replace the defective device printer is able to print as usual, in replacing fuser film sleeve must be careful because the material is easily broken when hit.
After completion of all to the installation phase, now I've Laserjet Printer can print as normal without any constraint.
By purchasing such a cartridge the customer would save considerable amount of money. Replacement ink cartridges which are offered by the printer manufacturers are quite expensive than printer itself. renting impresoras alicanteReplyDelete
I truly appreciate this blog post. Thanks Again.ReplyDelete